10
Assembly
Step 7
Step 7: Attach Long Handles to Gas and
Charcoal Grill Lids
Locate
: (2) Long Lid Handle, (4) M6x15 bolts.
Procedure
:
Open the grill lids and place the handles over
the holes in each lid. Then insert an M6x15
bolt through each hole.
Grill
Lid
Fig. 7
Step 8: Attach the Smoke Stack
Locate
: Smoke Stack Assembly, (4) M6x15
bolts and (4) M6 KEPS nuts.
Procedure
:
Remove Smoke Stack Cover as shown in Figure
8A. Then insert Smoke Stack through the Grill
Lid from the INSIDE as shown in Figure 8B.
Note: The Smoke Stack Cover attaching screw
MUST be located towards the right hand side of
the Lid, as shown in Figure 8D.
Attach the Lid to the Smoke Stack using M6x15
bolts inserted through the Lid from the OUT-
SIDE, with the M6 KEPS nuts positioned and
tightened on the INSIDE of the Lid as shown in
Figure 8C. Then replace the Smoke Stack
Cover as shown and the position of the Handle
should be as shown in Figure 8D.
Step 8
Fig. 8A
Fig. 8B
Fig. 8C
Fig. 8D
