17
Assembly
Step 17: Attach Match Holder and Chain
Locate
: Match Holder & Chain and (1) M6x15
bolt.
Procedure
: Attach match holder and chain to
the top rear hole in the left rear leg by insert-
ing an M6x15 bolt through the loop at the end
of the chain and securely tightening. See Fig-
ure 17.
Step 18
Fig.17
Step 17
Gas Drip tray
Step 18: Attach Handles to Drip Trays
Locate:
(1) Gas Side Drip tray and (1) Char-
coal Side Drip Tray, (2) Short Handles, (4)
M6x15 bolts, (1) Removable Grease Cup
Procedure:
Refer to Fig. 18A - Place (2)
M6x15 bolts through the holes in the sides of
each of the two Trays. Fit a Handle over the
bolts and attach the Handles to the Trays.
Tighten all (4) bolts securely.
Refer to Fig. 18B Note: The Gas Side Drip
Tray has a removable Grease Cup attached
to the underside. This tray MUST be used
only on the Gas Side of the grill.
Refer to Fig. 18C – The removable Grease
Cup slides into the bottom of the Gas Side
Drip Tray, from the front.
Note: Grease Drip Trays and Grease Cup
Should be emptied and cleaned after each
use to prevent flare
–
ups and /or grease
fires
Fig.18A
Gas Drip tray
Charcoal Drip tray
Fig.18B
Fig.18C
Charcoal Drip tray
