18
Assembly
Step 19: Attach Charcoal Damper Handle
Locate
: Charcoal Damper Handle
Procedure
:
Screw the handle into the hole located above
the vertical slots on the charcoal side of the
grill. The handle should slide back and forth
to open and close the damper.
Step 19
Step 20: Install Warming Racks
Locate
: (2) Warming Racks and (4) M6x30
bolts
Procedure
: To attach the warming racks, in-
sert (1) of the M6x30 bolts through the lid from
the outside as shown in Figure 20A and posi-
tion the warming rack so that the bolt is going
through the wire loop as shown in Figure 20B.
Then align the wire loop on the opposite end
of the warming rack with the opposite lid hole
and insert the other M6x30 bolt.
Insert the wire legs into the holes on the sides
of the cabinet as shown in Figure 20C.
Repeat this procedure for the second Warm-
ing Rack.
Step 20
Fig. 20A
Fig. 20B
Fig. 20C
Fig. 19
