16
Installation Guide
The following items should be included in the carton:
v
v
Product complete with fixed white grille and pre-wired mains cable.
v
v
Fixing screws (2).
Overlay grilles which fit over the fixed white grille are available in different colours and finishes. Please
consult the price list for details. In the event of items missing or visible damage, please contact us on
01245 324560.
We would be most grateful if you would leave this Installation & User Guide and the
Guarantee Registration Card with the owner of the property.
SS2E W
Space Saver is primarily intended for installation
in the space beneath kitchen cupboards behind
the plinth. However, it can also be installed in
similar applications such as stair risers and other
built-in furniture.
This Space Saver model must not be installed in a
bathroom or other high humidity areas. Please
contact us on 01245 324560 for details of products
suitable for these applications.
Space Saver is classified as a fixed appliance and
electrical connection should be via a 10A double
pole fused spur with a minimum contact gap of
3mm. The fused spur must not be directly above the
heater but should be accessible after completion of
the installation. If the pre-wired mains cable is
damaged, it must be replaced by either the
manufacturer, its service agent or similarly qualified
persons. The appliance must be earthed.
To ensure adequate airflow, a minimum clearance
of 20mm between the top of the product and any
shelving is essential.
To avoid the possibility of vibration, this product
must be installed on a flat, even surface.
There must be no rear access to the product after
completion of the installation.
To conform with Building Regulations Part L (Part J
in Scotland), a remote room thermostat (Smith’s
Part No. RT002) can be used in conjunction with
this Space Saver fan convector.
Space Saver is fitted with overheat protection. The
heater will automatically stop in the event of the
heating elements reaching the cut out temperature.
In the event of any difficulty please contact us on
01245 324560.
Please note the guarantee may be invalidated
if this product is not installed and used in
accordance with this guide.
1. We recommend the use of a kneepad when
installing this product. Cut the opening in the
plinth to the size shown in the table. Use
method A or B. For carpeted or laminated
floors use method B with the product a
minimum of 20mm above floor level.
Model
Width A
Height B*
SS2E W
475mm
96mm
* The overall height of the grille is 100mm. Use care
when cutting the opening
A
B
