Smithco 100684 Parts & Service Download Page 73 | Manualshive

Page: 73 / 94

background image

71

Accessories

HOSE REEL PLUMBING FOR 1008

HOSE REEL ADJUSTMENTS

OPERATIONAL CHECK:

  1.  Pull hose off drum at least one full revolution. A clicking noise should be heard from locking mechanism.
  2.  Let the hose retract.
  3.  Pull the hose off until the first click is heard. Drum should lock when the hose tension is removed.
  4.  Continue pulling the hose, no more than one revolution, until no clicking is heard. Hose should rewind

when tension is removed.

HOSE REPLACEMENT PROCEDURE:

1. Facing swivel, turn the hose drum clockwise until all of the hose is removed from the drum and the

drum is held by locking mechanism. Make sure spring is locked.

2. Remove hose clamps and disconnect hose from swivel. Remove old hose.
3. Insert new hose through roller guide, connect to swivel and reinstall hose clamps. Use spring guard

over hose to protect the hose from being cut by the drum.

4. Remove check ball from old hose and install on replacement hose.
5. Carefully, keeping the tension on the hose, pull the hose to release the locking mechanism. Let the

hose wind on the drum.

Use Dielectric Grease On All Electrical Connections

«
...
71
72
73
74
75
...
»

Summary of Contents for 100684































































































Reviews:

No comments

Related manuals for 100684

Brand: C.A. Technologies Pages: 5

Brand: Easy Pages: 15

COLORCATALOG 2006 ENGLISH

Brand: WAGNER Pages: 22

Brand: Coopers of Stortford Pages: 2

Brand: AMBIC Pages: 9

Brand: Fimco Pages: 8

Brand: Fimco Pages: 8

Brand: Raider Pages: 32

Brand: Tri-Con Pages: 4

Brand: PA Pages: 4

Brand: P.Lindberg Pages: 50

Brand: KISANKRAFT Pages: 24

Brand: Grant-bio Pages: 16

Brand: DeWalt Pages: 11

Brand: WALTHER PILOT Pages: 40

Brand: Grizzly Pages: 2

Brand: Grizzly Pages: 2

Brand: Multi-Clean Pages: 14

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands