31
EN
Carry bag (available for 300ml canister)
Lifting top flap allows access to
device user interface.
Lifting bottom flap allows the
canister to be viewed.
*sm
ith&n
ephew
REN
ASYS™
GO
Negativ
e Pres
sure W
ound
Therapy
Belt Loop
Tubing Pouch
RENASYS™ GO
Negative Pressure Wound
Therapy
*smith&nephew
Belt loop
Canister
tubing pouch
To place device into the carry bag:
1.
Open zipper on both sides of bag and place face down on a flat surface with viewing flaps on top.
2.
Place device face up on the open bottom section of the bag.
3.
Pull front of the bag over top of the device and feed both parts of one zipper together.
4.
Close zipper on the other side of the bag.
5.
Once fitted ensure canister tubing can move freely.
6.
Excess tubing can be coiled and placed in the pouch on the back of the carry bag.
Note:
Device and canister should remain in an upright orientation to maximize canister volume and optimize
complete blockage/canister over-capacity alarm.
Flaps on the front of the bag provide privacy and discretion for the user.
On rear of the bag, there is a belt loop, to allow users to wear RENASYS™ GO around their waist.
Note
: Device carry bag is designed to be a single patient use item.
10966 175239 Rev02 260917.indd 31
27/09/2017 09:09
