SMI RED250mobile, User Manual

Page: 89 / 176

© 2015 SensoMotoric Instruments (SMI)
Setting Geometry Measurements
Page 83
To automatically detect measurement settings:
1. On the Geometry tab, select the type of display from the Select
Display dropdown.
2. If you have not done so already, create a new profile, such as
"Experiment Laptop". See Creating Profiles.
3. If a second display is connected to the PC or Laptop, use the 1-2
button and select from the Select Display dropdown the display that
will be used with the RED250mob ile Eye Tracker . See Using Multiple
Displays.
4. Click Use Default Settings .
5. iViewRED will detect the measurement values and load these values
into the fields.
6. Select from 15 , 20 or 25 to enter the angle value of the Mounting
Bracket into the RED Angle [Degree] field. See Setting RED Angle.
Use Default Settings works on most systems. Some
systems may be incompatible with Windows™
standard interfaces. In this case, a manual check and
correction of the settings is recommended.