SMI RED250mobile User Manual Download

Page: 62 / 176

RED250mobile System User Guide

Page 56

Installing iViewRED Software

The Installation Package for

iViewRED

software is available as a free

download on the

Software Downloads

area of the SMI website. This

Installation Package also includes the required drivers.

If the

RED250mob ile Eye Tracker

has been shipped with the SMI

Laptop, then all required software is already installed. You
should, however check for software updates. See Checking for
Software Updates.

5.1

Obtaining the Installation Package

To obtain the

iViewRED

software Installation Package:

1. Go to the

Software Downloads

area of the SMI website at www.

smivision.com/software/.

2. Click the download link for the

iViewRED

Installer

SMI iViewRED.msi

3. On the

File Download

dialog, click

Save File

to download the installer

to your PC or Laptop.

Summary of Contents for RED250mobile

















































































































































































Search results

Summary of Contents for RED250mobile

Reviews:

Related manuals for RED250mobile

Brands by name

Popular brands

SMI RED250mobile, User Manual

Search results

Summary of Contents for RED250mobile

Reviews:

Related manuals for RED250mobile

Brands by name

Popular brands