background image

Important Safety Instructions

7

EN

•  Never modify or alter the construction of 

the appliance. For example, do not 
remove adjustable legs, panels, wiring 
or anti-tip brackets/screws.

•  Do not obstruct oven vents or openings 

for heat exhaust.

•  Test the appliance immediately after 

installation, following the instructions in 
this booklet. If the appliance does not 
work properly, disconnect it from the 
electrical power supply and call the 
service center. DO NOT attempt to 
repair the appliance.

•  All adjustments and servicing must be 

performed by qualified installers or 
service technicians.

•  Do not leave the packing material 

around the home. Sort the various items 
of waste and take them to the nearest 
specialized waste collection facility.

How to read the user manual

This user manual uses the following reading 
conventions:

1. Use instruction sequence.
•  Single use instruction.

SAVE THESE INSTRUCTIONS

CAUTION

: This unit is designed as 

a cooking appliance. For safety 
purposes, never use it for warming 
the room or as a space heater.

Installation

Information for the qualified 
technician: installation, operation 
and inspection.

Safety instructions

Information

Advice

Summary of Contents for TRU90X



















Reviews: