Instructions for the installer
32
6. BEFORE INSTALLATION
7. INSTALLATION
Do not discard packing in the home environment. Separate the various waste materials and take them to
the nearest differentiated collection centre.
In order to remove all manufacturing residues, we recommend cleaning the inside of the appliance. For
further information on cleaning see 12. CLEANING AND MAINTENANCE.
Choose carefully the location where the product will be installed:
1 it must not be too dusty: over time, the dust could block the burners making the use of the product
hazardous;
2 it must not be too exposed to the wind: during use, an excessively strong wind may compromise the
correct operation of the product;
3 when the appliance is installed on its trolley, it must be placed on a flat, level surface to ensure it is
level and stable.
This product may be installed in free-standing mode, on a small table or shelf, or built into a masonry or
wooden structure. Otherwise, it may be installed on a special trolley available for separate purchase.
In all cases, the instructions provided below must be complied with.
7.1 Installation on a support
The barbecue comes complete with 4 feet already screwed into its sides. Place the barbecue on a flat
surface and ensure that it is level, screwing in or unscrewing the feet as necessary.
Never use the appliance if the feet supplied are not screwed properly into place.
This would cause an overheating hazard which might put the user's safety at risk and damage the
appliance's appearance.
7.2 Built-in installation
Once the barbecue has been levelled with the aid of the 4 feet, it can be installed in compliance with the
dimensions supplied and the instructions below:
