![background image](http://html1.mh-extra.com/html/smc-networks/vmg11-series/vmg11-series_operation-manual_1299198017.webp)
16
Air Supply
Caution
1. Install air filters.
Install air filters at the upstream side of blow gun. Choose the
filtration degree of 5 μm or finer.
2. Install an after-cooler, air dryer or water droplet separa-
tor, etc.
Air excessive drainage may cause a malfunction of blow gun and
contaminate or damage the target object. To prevent this, install
an after-cooler, air dryer or water droplet separator, etc.
Operating Environment
Warning
1.
Do not use in an atmosphere of corrosive gases,
chemicals, sea water, water or water vapor or in an
environment where such substances may adhere.
2.
Provide shading in an environment where the product
is exposed to the sunlight.
3.
Do not use in an environment where a heat source is
at a close distance.
4.
Do not use in an environment where static electricity
is a problem. It may cause malfunction or failure of
the system. Please contact SMC for use in such an
environment.
5.
Do not use in an environment where spatters are
generated. There is danger of fires caused by
spattering. Please contact SMC for use in such an
environment.
6.
Do not use in an environment where the product is
exposed to cutting oil, lubricating oil or coolant oil.
Please contact SMC for use in an environment where
the product is exposed to such liquid as cutting oil,
lubricating oil or coolant oil.
Maintenance
Caution
1. In periodical inspections, check the following items
and replace the parts if necessary.
a) Scratches, gouges, abrasion, corrosion
b) Air leakage
c) Twisting, crushing and turning of connected tubes
d) Hardening, deterioration and softening of connected tubes
e) Loosening of nozzles
2. When removing the product, first stop the pressure
supply, exhaust compressed air in the piping and check the
condition of atmospheric release.
3. Do not disassemble or remodel the body of the
product.
Specific Product Precautions
Be sure to read this before handling