SMC Networks TigerCard 1000, User Manual

Page: 45 / 58

3-10
C
ONFIGURING AND
T
ESTING THE
N
ETWORK
C
ARD
Send and Receive Test
This test verifies that the network cable is connected correctly, so
that the network card can transmit and receive data.
The test requires two computers with the TigerCard 1000
network card installed. One computer generates and sends test
messages, the other computer receives the test messages and
transmits them back to the sender.
Note: You should run the Local Tests before running the Send
and Receive Test to ensure that the card’s basic functions
are working properly.
To run the test, on one computer be sure the configuration utility
is running to enable it as the receiver. On the other computer,
simply click on the “Run” button to start sending test messages.
The progress of the test is shown by the “Server Activity” status
bar. You can view the test results by clicking on the “View Test
Results” button.