SMCWBR14-G3
User Guide
-
58
-
1.
Do not turn off the router or press the Reset button while the firmware is
being upgraded.
2. The router will reboot after the Upgrading has been finished.
5.11.3 Factory Defaults
This page (shown in figure 5-50) allows you to restore the factory default settings for the
router.
Figure 5-50:
Restore Factory Default
Click the
Restore
button to reset all configuration settings to their default values.
•
The default
User Name
: Admin
•
The default
Password
: smcadmin
•
The default
IP Address
: 192.168.2.1
•
The default
Subnet Mask
: 255.255.255.0
Note
: Any settings you have saved will be lost when the default settings are restored.
5.11.4 Backup and Restore
This page (shown in figure 5-51) allows you to save current configuration of router as
backup or restore the configuration file you saved before.
Figure 5-51:
Backup & Restore Configuration
¾
Click the
Backup
button to save all configuration settings as a backup file in your
local computer.
¾
To restore the router's configuration, follow these instructions:
•
click the
Browse
button to select the backup file which you want to restore.
•
Click the
Restore
button.
Note:
The current configuration will be covered with the uploading configuration file. The
restoration process lasts for 20 seconds and the router will restart automatically. Keep
the router on during the restoring process, to prevent any damage.
