SMCWBR14-G3
User Guide
-
32
-
¾
Radius Server IP
-
Enter the IP address of the Radius Server
¾
Radius Port -
Enter the port number that the radius service used.
¾
Radius Password -
Enter the password for the Radius Server.
Be sure to click the
Save
button to save your settings on this page.
Note
: The router will reboot automatically after you click
save
.
5.5.2 MAC Filtering
The Wireless MAC Filtering for wireless networks are set on this page, figure 5-16:
Figure 5-16:
Wireless MAC address Filtering
The Wireless MAC Address Filtering feature allows you to control wireless stations
accessing the router, which depend on the station's MAC addresses.
¾
MAC Address
-
The wireless station's MAC address that you want to access.
¾
Status
-
The status of this entry either
Enabled
or
Disabled
.
¾
Privilege
-
Select the privileges for this entry. You may select one of the following
Allow
/
Deny
/
64-bit
/
128-bit
/
152-bit
.
¾
Description -
A simple description of the wireless station.
¾
WEP Key
-
Specify a unique WEP key (in Hexadecimal format) to access the router.
To set up an entry, follow these instructions:
First, you must decide whether the unspecified wireless stations can access the router or
not. If you desire that the unspecified wireless stations can access the router, please
select the radio button
Allow the stations not specified by any enabled entries in the
list to access
, otherwise, select the radio button
Deny the stations not specified by
any enabled entries in the list to access
.
To Add a Wireless MAC Address filtering entry, click the
Add New…
button. The "
Add
or Modify Wireless MAC Address Filtering entry"
page will appear, shown in figure
5-17:
