SMCWBR14-G3
User Guide
-
14
-
Chapter 5: Configuring the Router
This chapter describes each web page's key functions.
5.1 login
After your successful login, you can configure and manage the router. There are ten main
menus on the left of the web-based utility. Submenus will be available after you click one
of the main menus. The eleven main menus are:
Status, Quick Setup, Network,
Wireless, DHCP, Forwarding, Security, Static Routing, IP & MAC Binding, DDNS and
System Tools.
On the right of the web-based utility, there are the detailed explanations
and instructions for the corresponding page. To apply any settings you have altered on the
page, please click the
Save
button.
The detailed explanation for each web pages key function is listed below.
5.2 Status
The Status page displays the router's current status and configuration. All information is
read-only.
1. LAN
This field displays the current settings or information for the LAN, including the
MAC
address, IP address and Subnet Mask.
2. Wireless
This field displays basic information or status for wireless function, including
Wireless
Radio, SSID, Channel, Mode, Wireless MAC address and IP address.
3. WAN
These parameters apply to the WAN port of the router, including
MAC address, IP
address, Subnet Mask, Default Gateway, DNS server
and
WAN connection type
.
If PPPoE is chosen as the WAN connection type, the
Disconnect
button will be
shown here while you are accessing the Internet. You can also cut the connection by
clicking the button. If you have not connected to the Internet, just click
Connect
to
establish the connection.
4. Traffic
Statistics
This field displays the router's traffic statistics.
5. System
Up
Time
The amount of time from when the router was switched on or reset.
