SMCWBR14-G3
User Guide
-
45
-
Figure 5-33:
IP address Filtering
To disable the IP Address Filtering feature, keep the default setting,
Disabled
. To set up
an IP Address Filtering entry, click
Enable
Firewall and
Enable
IP Address Filtering on
the Firewall page, and click the
Add New…
button. The page "
Add or Modify an IP
Address Filtering entry
" will appear shown in figure 5-34:
Figure 5-34:
Add or Modify an IP Address Filtering Entry
To create or modify an IP Address Filtering entry, please follow these instructions:
1.
Effective Time -
Enter a range of time in HHMM format, which point to the range
time for the entry to take effect. For example, 0803 - 1705, the entry will take effect
from 08:03 to 17:05.
2.
LAN IP Address -
Enter a LAN IP Address or a range of LAN IP addresses in the
field, in dotted-decimal notation format. For example, 192.168.1.20 - 192.168.1.30.
Keep the field open, which means all LAN IP Addresses have been put into the field.
3.
LAN Port -
Enter a LAN Port or a range of LAN ports in the field. For example, 1030
- 2000. Keep the field open, which means all LAN ports have been put into the field.
4.
WAN IP Address -
Enter a WAN IP Address or a range of WAN IP Addresses in the
