SMC Networks SMCD3GNV3, User Manual

Page: 27 / 213

錯誤 錯誤 錯誤 錯誤
!
使用 使用 使用 使用
[
常用 常用 常用 常用
]
索引標籤將 索引標籤將 索引標籤將 索引標籤將
Heading 1
套用到您想要在此處顯示的文字 套用到您想要在此處顯示的文字 套用到您想要在此處顯示的文字 套用到您想要在此處顯示的文字。 。 。 。
27
SMCD3GNV Wireless Cable Modem Gateway User Manual
5. In the Local Area Connection Properties dialog box, verify that Internet Protocol (TCP/IP)
is checked. Then select Internet Protocol (TCP/IP) and click the Properties button. The
Internet Protocol (TCP/IP) Properties dialog box appears.
6. In the Internet Protocol (TCP/IP) Properties dialog box, click Obtain an IP address
automatically to configure your computer for DHCP. Click the OK button to save this
change and close the Internet Protocol (TCP/IP) Properties dialog box.
7. Click the OK button again to save your changes.
8. Restart your computer.
Configuring Microsoft Windows Vista
Use the following procedure to configure a computer running Microsoft Windows Vista with
the default interface. If you use the Classic interface, where the icons and menus resemble
previous Windows versions, perform the procedure under “Configuring Microsoft Windows
2000” on page 25.
1. On the Windows taskbar, click Start, click Control Panel, and then select Network and
Internet Icon.
2. Click View Networks Status and tasks and then click Management Networks
Connections.
3. Right-click the Local Area Connection icon and click Properties.
4. Click Continue. The Local Area Connection Properties dialog box appears.
5. In the Local Area Connection Properties dialog box, verify that Internet Protocol
(TCP/IPv4) is checked. Then select Internet Protocol (TCP/IPv4) and click the
Properties button (see Figure 10). The Internet Protocol Version 4 Properties dialog box
appears.