![background image](http://html1.mh-extra.com/html/smc-networks/smcd3gnv3/smcd3gnv3_user-manual_1299811189.webp)
錯誤
錯誤
錯誤
錯誤
!
使用
使用
使用
使用
[
常用
常用
常用
常用
]
索引標籤將
索引標籤將
索引標籤將
索引標籤將
Heading 1
套用到您想要在此處顯示
套用到您想要在此處顯示
套用到您想要在此處顯示
套用到您想要在此處顯示的文字
的文字
的文字
的文字。
。
。
。
189
SMCD3GNV Wireless Cable Modem Gateway User Manual
3. Be sure the computer connected to the Gateway is configured to use the same subnet
mask and gateway settings as the Gateway (see “Viewing and Editing Your Local IP
Configuration” on page 47).
4. Ping the Gateway from a computer on the same subnet as the Gateway (see “Testing the
Path from a Computer to the ” on page 191). If the ping fails and there is no firewall
software installed, your network configuration, NIC, or cabling is probably at fault.
5. Release and renew the NIC’s IP address:
a. From the Windows task bar, click Start and select Run.
b. In the Open field, type cmd and click OK.
c. At the first command prompt, type ipconfig/release and press Enter.
d. At the next command prompt, type ipconfig/renew and press Enter.
e. Check whether your computer obtained an IP address other than
169.254.x.x
or
0.0.0.0
.
6. If the proble m continues, power cycle the Gateway and computer:
a. Turn off the computer and turn off Gateway.
b. Turn on the Gateway and turn on co mputer.
7. For secured wireless connections, be sure you entered the correct security key when
connecting to a secured wireless network.
Unable to Access the Internet
If the Gateway cannot access the Internet, it could be due to several reasons, such as a
failed Internet connection, a misconfigured Gateway, or a misconfigured NIC.
1. Unplug the Gateway.
Note: If the Gateway is located where you cannot easily unplug it, you can restart it using the
Restore / Reboot Gateway menu (“Restoring or Rebooting the Gateway” on page 98).
2. Turn off the Gateway for three minutes.
3. Turn off all computers attached to your network.
4. Plug in the Gateway first, turn it on, and let it boot.
5. After the Gateway completes its connection to the ISP, restart your computer.
6. Check that the Gateway’s Online LED is ON. If it is OFF, replace the coaxial cable
connecting the Gateway to the cable service. If the Online LED does not go ON after the
Gateway has been powered up for several minutes, contact your cable provider to confirm
that the service is active.
Summary of Contents for SMCD3GNV3
Page 212: ......