Copyright
©
2012 SMC Networks
Page 1
All Rights Reserved
I/M SMCWK01-Z rev. 1.0
4/19/11
SMCCO10-Z Carbon Monoxide Alarm User Guide
Product Introduction
The SMCCO10-Z Is a wireless carbon monoxide (CO) alarm that monitors the levels of CO gas and provides early warning when potentially
dangerous levels exist. The SMCCO10-Z uses patented and field-proven electrochemical sensor technology. If a dangerous concentration of CO is
detected by patented and field-proven electrochemical sensor:
An LED indicator on the SMCCO10-Z goes ON.
An internal siren sounds in temporal 4 pattern.
The SMCCO10-Z sends alarm signal to the Touchscreen within 15 seconds of detecting dangerous concentration of CO gas. The Touchscreen
activates its internal siren and reports the alarm condition to the central monitoring station if the system is monitored.
The SMCCO10-Z also detects low battery, wall tamper, and sensor end-of-life. These
trouble codes are sent to the Touchscreen, which reports the condition to the central
monitoring station. The alarm automatically resets when CO is no longer detected. The
SMCCO10-Z does not detect fire, smoke, or any other gas.
TheSMCCO10-Z is listed and complies with the ANSI/UL 2034 standard for CO alarms. It is
intended for residential indoor dwelling unit applications and other areas approved by the
authority having jurisdiction (AHJ). It is not intended for use in industrial applications.
To help identify the date to replace the alarm, an area has been reserved on the side of
the alarm. Write the “replace by” date (seven years from power up) with a permanent
marker in the area provided.
WARNING:
After seven years from initial power up, this alarm beeps two times every 30 seconds to indicate it is time to replace the alarm.
Replace the alarm immediately because it will not detect CO in this condition.
