-28-
No.PS
※※
-OMV0004-C
Setting of diagnostic information selection
It is possible to set the condition in which the diagnostic information of the
process data can be transferred to the upper devices such as a master.
: IO-Link mode can provide the communication function.
: Refer to page
61
for details of the diagnostic information.
Press the SET button to set.
Return to function selection mode.
[F 0] Setting of the display units, switch output specifications and
diagnostic information selection function is completed.
●
Available display unit and minimum set value
Unit
ISE70
ISE71
MPa
0.001
kPa
1
kgf/cm
2
0.01
bar
0.01
psi
0.1