![background image](http://html1.mh-extra.com/html/smc-networks/idu11e-10-c/idu11e-10-c_operation-manual_1299726020.webp)
IDX-OM-W022
Air Dryer
2 Transportation / Installation
2-2 Installation
2
-
3
IDU Series
2 - 2 - 3 Air
piping
•
Connection to the inlet and outlet of compressed air should be made removable by using union and so on.
•
Pressing the hexagonal fitting with screw wrench and so on, connect the air piping fittings to the body.
•
When mounting any part such as an air filter on the fitting at the compressed air inlet or outlet port, support the
part to prevent excessive force from being applied to the product
•
Be careful not to let the vibration of the air compressor transmit.
•
If the temperature of compressed air on the inlet side is higher than 50
o
C, place an aftercooler after the air
compressor. Or, make the temperature of the place where the air compressor is installed lower than 50
o
C.
•
If the air supply makes high pressure fluctuation (pulsation), take any countermeasures such as installing air
tank.
•
Flash the piping sufficiently in order to avoid any foreign substances such as dust, sealing tape, liquid gasket,
etc. when piping before piping connection.Foreign substances in the piping can cause cooling failure or
drainage failure.
•
Use pipes and fittings that have enough endurance against the operating pressure and temperature. And
connect it firmly to prevent air leakage.
•
Provide bypass piping to make it possible to do maintenance without stopping the air compressor.
2 - 2 - 4 Drain
Tube
•
A polyurethane tube of 10mm external diameter is attached to the drain tube. The outlet end of the tube
is released to atmosphere. And let drain flow through the tube into a scupper and so on.
•
Using the pressure of the compressed air, drain will be discharged periodically. Fix the outlet end of the
tube so as not to swing during discharge.
•
Prevent the drain tube from riser piping.
•
Prevent the drain tube from being folded or flatted. Since the drain tube is coming from the bottom of the
body, be careful to avoid the body from stomping over the tube during installation.
We recommend the bypass piping sets that
we are selling separately as accessories.
Model No.
Name
Q.t
Applicable
Model
IDF-BP320
Bypass
piping
sets
1 IDU8E
1 IDU11E
IDF-BP322
1 IDU15E1