![background image](http://html1.mh-extra.com/html/smc-networks/idu11e-10-c/idu11e-10-c_operation-manual_1299726022.webp)
IDX-OM-W022
Air Dryer
2 Transportation / Installation
2-2 Installation
2
-
5
IDU Series
Wiring procedure
•
Remove the terminal block cover or the rear panel.
•
Insert the cord through the membrane grommet and connect it to the terminal block (refer to the label on the
terminal block).
M3 screw tightening torque: 0.6~1Nm.
During wiring work, do not touch other sections except terminal block.
•
Attach the cover or the rear panel as it were.
Length of the power cable
The length of the power cable should extend less than 30m from the product.
Connecting to the power supply
Connect the power cable and the earth to the terminal block. M3 screw is used for the connection part. Make sure
to use round crimped terminal.
Applicable crimped terminal: 1.25-3 (Width: 6.5mm and below)