![background image](http://html1.mh-extra.com/html/smc-networks/hrs100-series/hrs100-series_operation-manual_1299247040.webp)
HRX-OM-S010
Chapter 4 MODBUS communication function
4.3
Setting and checking
HRS100/150 Series
4-6
Slave addresses
(
MODBUS
)
Setting and checking
9.
Press the [SEL] key once.
The set screen of slave address (MODBUS) is displayed on the digital display.
10.
Select slave address (MODBUS) from the table below with [
▲] key or [▼] key, and confirm
by pressing “SEL”.
Table 4.3-6
List of set values
Set values
Explanation
Initial value
(Default setting)
Setting/checking are not available unless the
serial protocol setting is MODBUS.
to
Setting of slave address for MODBUS.
Set range is 1 to 99.
Communication speed
(
MODBUS
)
Setting and checking
11.
Press the [SEL] key once.
The set screen of communication speed (MODBUS) is displayed on the digital display.
12.
Select communication speed (MODBUS) from the table below with [
▲] key or [▼] key, and
confirm by pressing “SEL”.
Table 4.3-7
List of set values
Set values
Explanation
Initial value
(Default setting)
Setting/checking are not available unless the
serial protocol setting is MODBUS.
9600bps
19200bps
○
PV
SV
PV
SV