![background image](http://html1.mh-extra.com/html/smc-networks/hrs100-series/hrs100-series_operation-manual_1299247055.webp)
HRX-OM-S010
Chapter 4 MODBUS communication function
HRS100/150 Series
4.10
Register Map
4-21
4.10.7 Circulating fluid set temperature
The circulating fluid set temperature can be set by specifying the circulating
fluid set temperature with the selected temperature unit (°C or °F) during
SERIAL mode.
If the temperature exceeds the upper limit of the circulating fluid set
temperature range, the circulating fluid set temperature is changed to the
upper limit value. If it is lower than the lower limit, the circulating fluid set
temperature is changed to the lower limit value.
4.10.8 Operation Start Command
The operation can be controlled by sending the operation start command
during SERIAL mode.
0=Run stop
1=Run start