![background image](http://html1.mh-extra.com/html/smc-networks/hrs100-series/hrs100-series_operation-manual_1299247060.webp)
HRX-OM-S010
Chapter 5 Simple communication protocol function
5.3
Setting and checking
HRS100/150 Series
5-4
5.3 Setting and checking
5.3.1
Setting and checking items
The table below explains the setting items of the simple communication
protocol function and the initial values.
Table 5.3-1
Communication setting items
Display
Item
Contents
Initial value
Communication mode Sets communication mode.
LOC
Serial protocol
Sets serial communication protocol.
MDBS
Communication
specification
Sets standard of the serial communication.
485
RS-485 terminal
Sets terminal of RS-485.
OFF
Slave address
(Simple
communication
protocol)
Sets slave address of simple communication
protocol. [----] is displayed when the setting of
serial protocol is not simple communication
protocol.
---- (1)
Communication
speed
(Simple
communication
protocol)
Sets
communication
speed
of
simple
communication protocol. [----] is displayed
when the setting of serial protocol is not simple
communication protocol.
---- (9.6)
BCC
(Simple
communication
protocol)
Sets error detection code of communication of
simple communication protocol. [----] is
displayed when the setting of serial protocol is
not simple communication protocol.
---- (ON)
Data length
(Simple
communication
protocol)
Sets data length. [----] is displayed when the
setting of serial protocol is not simple
communication protocol.
---- (8BIT)
Parity check
(Simple
communication
protocol)
Sets parity check. [----] is displayed when the
setting of serial protocol is not simple
communication protocol.
---- (NON)
Stop bit length
(Simple
communication
protocol)
Sets bit length. [----] is displayed when the
setting of serial protocol is not simple
communication protocol.
---- (2BIT)
Response delay time
(Simple
communication
protocol)
Sets time to delay the response message of
simple communication protocol. [----] is
displayed when the setting of serial protocol is
not simple communication protocol.
---- (0)
Communication
range
(Simple
communication
protocol)
Sets
communication
range
of
simple
communication protocol. [----] is displayed
when the setting of serial protocol is not simple
communication protocol.
---- (RW)