HRX-OM-S010
Chapter 2 Contact input/output communication
2.4
Setting and checking
HRS100/150 Series
2-6
Contact input signal1
Setting and checking
3.
Display the screen of contact input signal 1 by pressing the [SEL] key several times.
The set screen of contact input signal 1 is displayed on the digital display.
4.
Select contact input signal 1 from the table below with [
▲] key or [▼] key, and confirm by
pressing “SEL”.
Table 2.4-3
List of set values
Set values
Explanation
Initial value
(Default setting)
Without signal input
Run/stop signal input
○
External switch signal input (N.O. type)
1,
2
External switch signal input (N.C. type)
1,
2
1
：
When the setting of the communication mode is “DIO mode”, “External switch signal
input
” cannot be set.
2
：
When the setting of the communication mode is “SEIRAL mode” and the protocol
setting is
“Simplified communication protocol 2”, “External switch signal input”
cannot be set.
Contact input signal 1 type
Setting and checking
5.
Press the [SEL] key once.
The set screen of contact input signal 1
type is displayed on the digital display.
6.
Select contact input signal 1
type from the table below with [
▲] key or [▼] key, and confirm
by pressing “SEL”.
Table 2.4-4
List of set values
Set values
Explanation
Initial value
(Default setting)
Setting/checking are not available if the
setting of contact input signal 1 is OFF.
Alternate signal
○
Momentary signal
1
1
：
Used when the setting of the contact input 1 is “Operation stop signal input”.
PV
SV
PV
SV
