SMC Networks HRR010-A-10 Series, Operation Manual

Page: 106 / 166

HRX-OM-X084
Chapter 5 Display and Setting of Various Functions
5.5 Advanced setting mode HRR Series
5-54
Contact output signal 3 Select maintenance
24.
Press the [▼] key. Displays screen for setting the selected maintenance of Contact
output signal 3. The alarm is valid when the “selected maintenance status signal output”
is active.
Select the maintenance alarm No. to be allocated to Contact output signal 3.
●Setting range: MT.01 to MT.05 (Initial value: MT.01)
5.5.6 Reset menu
Values set by the customer are changed back to the default values.
Operation time / Length of operaton are reset.
Reset menu TOP screen
1.
When the “MENU” key is pressed while the Communication Setting Menu TOP screen
is displayed, the display is changed to the “Reset menu TOP screen”.
Set data reset
2.
Press the [▼] key. Displays screen for data reset.
Press “ENT” key when resetting the data. When the display is flashing, press [▲], [▼] key
and select “YES”, then, press “ENT” key.
Set value Contents
Initial value
NO
Not reset
○
YES
Resets all the data
( Operation time/ Length of operation are not
reset )
－
Reset menu TOP screen
ALL ⇒ RESET
(
Alternately displayed
)
Set data reset
D OUT3 ⇒ MANT ⇒ CODE
(
Alternately displayed
)
Contact output signal 3 Selected maintenance alarm No.