B a s ic I n s ta l l a tion P roc e d u re
1.
Con n e c t the L AN :
Y ou can connect the W ireless Cable Modem G ateway to your P C, or to a
hub or switch. R un E thernet cable from one of the L AN ports on the rear of the W ireless
Cable Modem G ateway to your computer’ s network adapter or to another network device.
Y ou can use either a standard straight through or cross over E thernet cable since the
gateway incorporates Auto-MDI MDIX functionality.
Y ou can also connect the W ireless Cable Modem G ateway to your P C (using a wireless client
adapter) via radio signals.
N OT E
: It is recommended that for first-time setup you use a wired connection.
2.
Con n e c t the W AN :
Connect a coax cable to the CATV port on the back of the W ireless
Cable Modem G ateway from a cable port located in your home. W hen connecting to the
CATV port, use only manufactured coax ial patch cables with F -type connectors at both
ends for all connections.
N ote
: If this modem was NO T installed by the cable service provider (ISP ) or is being used
to replace another cable modem – please contact your Cable O perator (ISP ) to register the
SMC8 013W G . W ithout registering the modem with your ISP it will be unable to connect to
the cable network system.
3.
P ow e r on :
Connect the power adapter to the E Z Connect™ W ireless Cable Modem G ateway.
W a rn in g
: O nly use the power adapter that was provided with the E Z Connect™ W ireless Cable
Modem G ateway, using another power adapter may damage your unit and void the warranty.
