CH AP TER 6 | Na v i g a t i n g t h e W e b -b a s e d Ad m i n i s t r a t i o n
The E Z Connect™ W ireless Cable Modem G ateway’ s management interface allows you to
configure both basic and advanced features and options. Some of these advanced functions
include: hacker attack detection, IP and MAC address filtering, intrusion detection, port
forwarding setup, virtual DMZ hosts, as well as other advanced functions.
M a k in g Con f igu ra tion Cha n ge s
O nce a configuration change has been made on a page, be sure to click the [ Apply] or [ Nex t]
button at the bottom of the page to enable the new setting.
SYSTEM
P a s s w ord S e ttin gs
F rom this section you can configure new passwords.
Y ou can also set the Idle Time O ut value that the SMC8 013W G will keep an account logged in
for. The default Idle Time O ut value is 10 min.
To access the P assword Settings configuration page, on the Side Navigation bar, click on
[ System] link and then click on the [ P assword Settings] link.
If your password is lost, or you cannot gain access to the user interface, contact your cable
operator.
L A N
(
Note: Depending on your cable operator, this option may not be available)
F rom this section you can configure the following settings:
•
E nable or Disable the integrated DH CP server
•
Configure the DH CP L ease time for your DH CP clients
•
The IP Address P ool range for DH CP clients
To access the L AN configuration page, on the Side Navigation bar, click on [ L AN] link.
L AN I P
U se the L AN section to configure the L AN IP address for the W ireless Cable Modem G ateway and
to enable the DH CP server for dynamic client address allocation. Y ou can also configure the
L ease Time for the DH CP clients on your network.
