SMC Networks ELITEVIEW Management Manual Download Page 215

Page: 215 / 232

-2 V

IEWER

I-23

Cause:The MIB database is corrupt.
Action: Rebuild the MIB database.

Invalid search mode.

Cause: (Internal error.) An application used the wrong search mode.
Action: Please contact Accton Technical Support for help.

MIB database error.

Cause: (General error.)
Action: Please contact Accton Technical Support for help.

Out of memory.

Cause: Out of memory.
Action: Close other programs and retry.

Mib-2 Viewer

Cannot find the text any more!

Cause: The text you specified cannot be found at the other position.
Action: None.

Cannot find this text.

Cause: The text you specified cannot be found.
Action: Verify text.

Cannot open statistics window.

Cause: System may be out of resources.
Action: Close some applications and retry.

Create root window failed.

Cause: System may be out of memory and resource.
Action: Close some applications and retry.

Initial Tree failure.

Cause: System error.
Action: Reset the system and retry. If the same error occurs, contact SMC Technical Support.

Mib2 viewer cannot get any SNMP response from target.

Summary of Contents for ELITEVIEW









































































































































































































































Search results

Summary of Contents for ELITEVIEW

Reviews:

Brands by name

Popular brands

SMC Networks ELITEVIEW, Management Manual

Search results

Summary of Contents for ELITEVIEW

Reviews:

Brands by name

Popular brands