manualshive.com logo in svg

SMC Networks ELITEVIEW, Management Manual, Page: 138 / 232

Share
Download
SMC Networks ELITEVIEW Management Manual Download Page 138

U

SING

 RMON

9-24

Configuring Filters

 – You can set up to 20 filters for each channel. Just highlight the concerned channel and then 

press the Filter button. If you define more than one filter, they will be OR’ed together and compared against data 
crossing the specified interface. To configure filters, click on the 

Add (Edit)

 button to add (edit) an entry. The 

dialog box that opens is described in the following table.

Buffer control 
Index

A number that identifies this buffer in the buffer control table.

Description

A comment provided by the user describing this channel.

Buffer

Displays the buffer for the selected control entry.

Filter

Displays the filter control table.

On/Off

This button is used to manually enable or disable the capture channel.

Refresh Time for 
Control Table

The refresh interval for this control table. Range: 5-600 seconds

Separate Tables

Displays a tabbed window with the channel, filter and buffer tables.

Table 9-18  Channel and Buffer Control Table

Field

Description

Summary of Contents for ELITEVIEW









































































































































































































































Reviews:

No comments