manualshive.com logo in svg

SMC Networks ELITEVIEW, Management Manual

Share
Download
SMC Networks ELITEVIEW Management Manual Download Page 122

U

SING

 RMON

9-8

Statistics are provided for the following areas.

The statistics for each area are further described in the following table.

 

Table 9-6  Statistics Areas

Field

Description

Utilization

Displays the percentage of bandwidth utilized over the sample period. It also shows the total count, 
the rate, and the rate of change (delta) for packets and bytes seen on the interface. 

Packets

Displays the total count, the rate, and the rate of change (delta) for all packets, broadcasts, multicasts, 
and dropped packets.

Errors and 
Collisions

Displays the total count, the rate, and the rate of change for CRC/alignment errors, undersize packets, 
oversize packets, fragments, jabbers, and collisions.

Packet Size

 Displays the distribution of packet sizes, including the total count, the rate, and the rate of change for 
each packet size.

Summary of Contents for ELITEVIEW









































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands