manualshive.com logo in svg

SMC Networks ELITEVIEW, Management Manual

The SMC Networks ELITEVIEW management manual is a comprehensive resource that provides detailed instructions and guidance on effectively managing your network. This essential manual is available for free download from manualshive.com, empowering you with the knowledge to optimize your network's performance and ensure seamless operations.

Share
Download
background image

T

ROUBLESHOOTING

H-2

Distributable Software

Symptom

Discovery does not find any devices.

Possible Causes

1. EliteView network management station (NMS) may be using an IP address that is used by another device.
2. There may be a cabling problem.

Suggestions

1. Try changing the address of the EliteView NMS.
2. If EliteView is running, you should see a trap and an alarm indicating that a device has been restarted. From 

the Alarm Log, copy the IP address into the search criteria and attempt to discover this node. If the node still 
cannot be located, check for cabling or other logical problems.

Trap Manager: MIB Variable Not Found

This agreement is governed by the laws of the Province of Alberta, Canada. The CodeBase DLL SUB-LICENSE 
consents to jurisdiction in the province of Alberta, Canada.

Symptom

Running Trap Manager shows this error message.

Possible Causes

1. The specified variable does not exist in the MIB database.
2. The MIB database has been changed.

Suggestions

Verify that the specified variable does exist in the MIB database.

Summary of Contents for ELITEVIEW









































































































































































































































Reviews:

No comments

Related manuals for ELITEVIEW

MACROMEDIA FLASH 8-USING FLASH VIDEO ENCODER Use Manual preview
FLASH 8-USING FLASH VIDEO ENCODER
Brand: MACROMEDIA Pages: 30
Siemens IEEE802.11 Tutorial preview
IEEE802.11
Brand: Siemens Pages: 84
ESET SMART SECURITY User Manual preview
SMART SECURITY
Brand: ESET Pages: 38
Black Box FX160A User Manual preview
FX160A
Brand: Black Box Pages: 65
Intel Active Management Technology v4.0 Administrator'S Manual preview
Active Management Technology v4.0
Brand: Intel Pages: 143
Genius VIDEOCAM SLIMCLIP Installation Manual preview
VIDEOCAM SLIMCLIP
Brand: Genius Pages: 7
Baby Lock Ellisimo Gold II Instruction And Reference Manual preview
Ellisimo Gold II
Brand: Baby Lock Pages: 50
Qualcomm pdQ Handbook preview
pdQ
Brand: Qualcomm Pages: 192
MACROMEDIA FLEX BUILDER-USING FLEX BUILDER Use Manual preview
FLEX BUILDER-USING FLEX BUILDER
Brand: MACROMEDIA Pages: 158
Navigon MN 6 User Manual preview
MN 6
Brand: Navigon Pages: 95
Paradyne ACCULINK 7800-D1-999 Installation Manual preview
ACCULINK 7800-D1-999
Brand: Paradyne Pages: 11
Echo Audio LAYLA LapTop Owner'S Manual preview
LAYLA LapTop
Brand: Echo Audio Pages: 66
Red Hat GLOBAL FILE SYSTEM 4.5 Manual preview
GLOBAL FILE SYSTEM 4.5
Brand: Red Hat Pages: 62
SWsoft SWsoft OpenVZ User Manual preview
SWsoft OpenVZ
Brand: SWsoft Pages: 119
Lenovo ThinkCentre M57 Specifications preview
ThinkCentre M57
Brand: Lenovo Pages: 4
Lenovo ThinkCentre Edge 62z Brochure & Specs preview
ThinkCentre Edge 62z
Brand: Lenovo Pages: 4
Lenovo ThinkCentre A58e Specifications preview
ThinkCentre A58e
Brand: Lenovo Pages: 4
Lenovo ThinkCentre A57e Specifications preview
ThinkCentre A57e
Brand: Lenovo Pages: 2

Brands by name

Popular brands

Load more brands