SMC Networks ELITEVIEW Management Manual Download Page 125

Page: 125 / 232

RMON U

TILITIES

9-11

Table 9-10 History Control Table

Field

Description

Total

The number of index entries contained in the Control Table.

Read Status

The read status of information in the Statistics Control Table.

Index

The index for the table row (automatically assigned).

Owner

The name of the person who created this entry in the Control Table.

Interface

The selected interface on this device (as defined in MIB2).

(Buckets) Requested

The number of samples to record. (Default: 50)

(Buckets) Granted

The number of samples allowed by the system.

(Sample) Interval

The interval between taking samples. (Default: 1800 seconds)

Status

The current status of this entry in the Control Table.

Summary of Contents for ELITEVIEW









































































































































































































































Search results

Summary of Contents for ELITEVIEW

Reviews:

Brands by name

Popular brands

SMC Networks ELITEVIEW, Management Manual

Search results

Summary of Contents for ELITEVIEW

Reviews:

Brands by name

Popular brands