SMC Networks Edge-corE NETWORKS BARRICADE SMCWGBR14-N2, User Manual

Page: 14 / 67

C
HAPTER
1
| Introduction
Front Panel
– 14 –
LED I
NDICATORS
The wireless Router includes ten status LED indicators, as described in the
following table.
N
OTE
:
After a device is successfully added to the network by WPS, the WPS
LED will remain on for about 5 minutes and then turn off.
Table 2: LED Behavior
LED Status Description
Power On The unit is receiving power and is operating normally.
Off There is no power currently being supplied to the
unit.
System On The Router is initializing.
Flashing The Router is working properly.
Off The Router has a system error.
WLAN On/Flashing The 802.11n radio is enabled and
transmitting or receiving data through wireless links.
Off The 802.11n radio is disabled.
LAN (4 LEDs) On The Ethernet LAN port is connected to a PC or server.
Flashing The Ethernet port is connected and is transmitting or
receiving data.
Off The Ethernet port is disconnected.
WAN On The port has a valid connection to another device.
Flashing The port is connected and is transmitting/receiving
data.
Off The port is disconnected.
WPS On Indicates the WPS authentication of a device has
been successfully completed.
Fast Flashing A wireless device failed to be added to the network by
WPS.
Slow Flashing A wireless device is connecting to the network by
WPS. This process will last for 2 minutes.
Off The WPS is not in progress.