C
HAPTER
6
| Wireless Settings
WPS
– 63 –
By PIN
If the new device supports Wi-Fi Protected Setup and the PIN method, you
can add it to the network by PIN with the following two methods.
Method One: Enter the PIN into my Router
1.
Keep the default WPS Status as Enabled and click the Add device
button in Figure 44, then the following screen will appear.
Figure 53: Add a New Device
2.
Choose Enter the new device's PIN and enter the PIN code of the
wireless adapter in the field behind PIN in the above figure. Then click
Connect.
N
OTE
:
The PIN code of the adapter is always displayed on the WPS
configuration screen.
3.
For the configuration of the wireless adapter, please choose Enter a PIN
into my access point or a registrar in the configuration utility of the
WPS as below, and click Next.
Summary of Contents for Edge-corE NETWORKS BARRICADE SMCWGBR14-N2
Page 1: ...USER GUIDE BARRICADETM N 802 11n Wireless 4 port Gigabit Broadband Router SMCWGBR14 N2...
Page 19: ...CHAPTER 2 Connecting the Router Connecting the Router 19 Figure 3 Hardware Installation...
Page 27: ...CHAPTER 3 Quick Installation Guide Quick Installation Guide 27 Figure 14 Quick Setup reboot...
