C
HAPTER
8
| Wireless Settings
Virtual Access Points (VAPs)
– 93 –
to configure and maintain a RADIUS server, WPA provides a simple
operating mode that uses just a pre-shared password for network
access. The Pre-Shared Key mode uses a common password for
user authentication that is manually entered on the access point
and all wireless clients. The PSK mode uses the same TKIP packet
encryption and key management as WPA in the enterprise,
providing a robust and manageable alternative for small networks.
■
WPA2
: WPA2 – WPA was introduced as an interim solution for the
vulnerability of WEP pending the ratification of the IEEE 802.11i
wireless security standard. In effect, the WPA security features are
a subset of the 802.11i standard. WPA2 includes the now ratified
802.11i standard, but also offers backward compatibility with WPA.
Therefore, WPA2 includes the same 802.1X and PSK modes of
operation and support for TKIP encryption.
■
WPA2-PSK
: Clients using WPA2 with a Pre-shared Key are
accepted for authentication.
■
WPA-WPA2 Mixed
: Clients using WPA or WPA2 are accepted for
authentication.
■
WPA-WPA2-PSK-mixed
: Clients using WPA or WPA2 with a Pre-
shared Key are accepted for authentication.
◆
Encryption Method
— Selects an encryption method for the global
key used for multicast and broadcast traffic, which is supported by all
wireless clients.
■
WEP
: WEP is used as the multicast encryption cipher. You should
select WEP only when both WPA and WEP clients are supported.
■
TKIP
: TKIP is used as the multicast encryption cipher.
■
AES-CCMP
: AES-CCMP is used as the multicast encryption cipher.
AES-CCMP is the standard encryption cipher required for WPA2.
◆
802.1X
— The access point supports 802.1X authentication only for
clients initiating the 802.1X authentication process (i.e., the access
point does not initiate 802.1X authentication). For clients initiating
802.1X, only those successfully authenticated are allowed to access the
network. For those clients not initiating 802.1X, access to the network
is allowed after successful wireless association with the access point.
The 802.1X mode allows access for clients not using WPA or WPA2
security.
◆
Pre-Authentication
— When using WPA2 over 802.1X, pre-
authentication can be enabled, which allows clients to roam to a new
access point and be quickly associated without performing full 802.1X
authentication. (Default: Disabled)
◆
802.1x Reauthentication Time
— The time period after which a
connected client must be re-authenticated. During the re-
authentication process of verifying the client’s credentials on the
Summary of Contents for E21011
