SMC Networks E21011, User Manual

Page: 130 / 264

C
HAPTER
13
| System Management Commands
– 130 –
apmgmtui snmp
This command enables and disables SNMP management access to the AP.
S
YNTAX
apmgmtui snmp [ enable | disable
]
enable - Enables SNMP management access.
disable - Disables SNMP management access.
D
EFAULT
S
ETTING
Enabled
C
OMMAND
M
ODE
Global Configuration
E
XAMPLE
AP(config)# apmgmtui snmp enable
AP(config)#
apmgmtip
This command specifies the client IP addresses that are allowed
management access to the access point through various protocols.
N
OTE
:
Secure Web (HTTPS) connections are not affected by the UI
Management or IP Management settings.
S
YNTAX
apmgmtip [ multiple < ip-address> <subnet-mask> | single <ip-
address> | any ]
multiple - Adds IP addresses within a specifiable range to the
SNMP, web and Telnet groups.
single - Adds an IP address to the SNMP, web and Telnet groups.
any - Allows any IP address access through SNMP, web and Telnet
groups.
ip-address - Adds IP addresses to the SNMP, web and Telnet groups.
subnet-mask - Specifies a range of IP addresses allowed
management access.
D
EFAULT
S
ETTING
All addresses
C
OMMAND
M
ODE
Global Configuration