SMC Networks E21011, User Manual

Page: 178 / 264

C
HAPTER
22
| Filtering Commands
– 178 –
C
OMMAND
U
SAGE
This command can disable wireless-to-wireless communications between
clients via the access point. However, it does not affect communications
between wireless clients and the wired network.
E
XAMPLE
AP(config)#filter local-bridge all-vap
AP(config)#
filter ap-manage
This command prevents wireless clients from accessing the management
interface on the access point. Use the no form to disable this filtering.
S
YNTAX
[no] filter ap-manage
D
EFAULT
Disabled
C
OMMAND
M
ODE
Global Configuration
E
XAMPLE
AP(config)#filter AP-manage
AP(config)#
filter acl-source-
address
This command configures ACL filtering based on source MAC addresses in
data frames.
S
YNTAX
filter acl-source-address { enable | disable | add < mac-address > |
delete < mac-address >}
enable - Key word that enables ACL filtering on the access point.
disable - Key word that disables ACL filtering on the access point.
add - Key word that adds a MAC address to the filter table.
delete - Key word that removes a MAC address from the filter table
mac-address - Specifies a MAC address in the form xx-xx-xx-xx-xx-
xx.
D
EFAULT
Disabled