SMC Networks CRB 40-A Series, Operation Manual

Page: 28 / 37

23
No.
5.2 Vertical auto switch unit
Part number for auto switch unit
(An auto switch will not be included.)
Size
Part number for unit
(For solid state auto switch and
reed auto switch D-S*/T*)
Part number for unit
(For reed auto switch
D-M9)
10 P611070-1 P611070-1M
15 P611090-1 P611090-1M
20 P611060-1 P611060-1M
30 P611080-1 P611080-1M
40 P611010-1 P611010-1M
The auto switch unit can be retrofitted to the rotary actuator (can be added after the actuator has been delivered).
The auto switch is not included with the auto switch unit, and must be ordered separately.
If the switch block for solid state auto switch is used for sizes 10 and 15, it is not required to order block unit parts
for the reed switch in the auto switch unit.
Size 10
Mounting for auto switch unit and auto switch
(Reed switch)
Mounting for auto switch unit and auto switch
(solid state switch D-S9*/T99)
Follow the procedure below in numerical order starting from 1 to
attach the auto switch unit.
(Note1. Auto switch of (4) is not included when ordering only a unit.)
(Note2. When the screw tightening torque is not specified, the
tightening torque shall be approx. 0.49Nm.)
Follow the procedure below in numerical order starting from 1 to
attach the auto switch unit.
(Note1. Auto switch of (4) is not included when ordering only a unit.)
(Note2. When the screw tightening torque is not specified, the
tightening torque shall be approx. 0.49Nm.)
How to mount auto switch unit
4. Auto switches (2pcs)
3. Cross recessed round
head screw (2pcs)
6. Cross recessed round
head screw (2pcs)
5. Cross recessed round
head screw (2pcs)
(Fixed temporarily)
1. Magnet lever (1pc)
2. Hexagon socket set
screw (1pc)
(Fixed temporarily)
(Fixed to 1 temporarily)
4. Auto switches (2pcs)
3. Cross recessed round
head screw (2pcs)
5. Cross recessed round
head screw (2pcs)
(Fixed temporarily)
1. Magnet lever (1pc)
2. Hexagon socket set
screw (1pc)
(Fixed to 1 temporarily)