SMC Networks CRB 40-A Series, Operation Manual

Page: 18 / 37

13
No.
4. Assembly / Disassembly procedure
4.1
With v
ertical auto switch unit
Size: 10, 15
Assembly procedure
For D-S/T99(V)
□
, S9P(V), 97/93A, 90/90A
1. Mount the magnet lever (5) to the shaft of the body (1) using the hexagon socket set screw (6).
2. Mount the cover (A) (9) to the body (1) using the cross recessed round head screws (17) (Use three screws for
size 15).
3. Insert the holding block (A) (8) into the groove of the cover (A) (9), place the cover (B) (10) on top, and fasten the
cross recessed round head screw (11).
4. Insert the auto switches (2) into the switch blocks (A) (12) and (B) (13) and mount them to the holding block (B)
(14) using the cross recessed round head screws (16).
Note: Skip step 4 for the solid state auto switches (3) and (4), as the switches are installed in the switch blocks
(A) (12) and (B) (13).
5. Carefully fix the switch blocks (A) (12) and (B) (13) (or the solid state switches) to the holding block (A) (8) using
the cross recessed round head screw (16).
6. Move the switch blocks (A) (12) and (B) (13) to the setting position and fasten them using the cross recessed
round head screws (16).
For D-M9□
1. Follow the same procedure up to step 3.
2. Carefully fix the switch holder (18) to the holding block (A) (8) using the hexagon socket set screw (19).
3. Insert the D-M9 auto switch into the switch holder (18) and carefully fasten it using the slotted set screw attached
to the switch (tightening torque is 0.05 to 0.1 Nm).
4. Move the switch holder (18) to the setting position and fasten it using the cross recessed round head screw (19).

When disassembling the product, disassemble it following the procedure in the reverse order.

When the screw tightening torque is not specified, the tightening torque shall be approx. 0.49 Nm.
19 Cross recessed round head screw
2 For D-M9
18 Switch holder 2 For D-M9
17 Cross recessed round head screw 2 3pcs. for size 15
16 Cross recessed round head screw 2
15 Cross recessed round head screw 2
14 Holding block (B) 2
13 Switch block (B) 1
12 Switch block (A) 1 3pcs. for size 15
11 Cross recessed round head screw 1
10 Cover (B) 1
9 Cover (A) 1
8 Holding block (A) 2
7 Magnet 1
6 Hexagon socket set screw 1
5 Magnet lever 1 Including No.7
4
Auto switch
1
Solid state auto switch
(one left-hand)
3
Auto switch
1
Solid state auto switch
(one right-hand)
2 Auto switch 2 Reed auto switch
1 Rotary actuator 1 Product
No. Description Qty Note
⑱
⑲
⑧