7
No.
Auto Switch Mounting
D-M9
□
External view and descriptions of auto switch unit
For sizes 10, 15
For sizes 20 to 40
1. Auto switch mounting
Insert the auto switch into
the groove of the
switch holder.
2. Auto switch securing
Align the auto switch with the
upper surface of the groove
on the side of the switch
holder, and secure the slotted
set screw. (Refer to the
enlarged view.)
Proper tightening torque:
0.05 to 0.1 [N·m]
3. Switch holder securing
After the actuated position has been adjusted
with the cross recessed round head screw, use
the auto switch.
When tightening the screw, take care that the
auto switch does not tilt.
1. Auto switch mounting
Insert the auto switch into
the groove of the
switch holder.
2. Auto switch securing
Align the auto switch with the
upper surface of the groove
on the side of the switch
holder, and secure the slotted
set screw. (Refer to the
enlarged view.)
Proper tightening torque:
0.05 to 0.1 [N·m]
3. Switch holder securing
After the actuated position has been adjusted
with the cross recessed round head screw, use
the auto switch.
When tightening the screw, take care that the
auto switch does not tilt.
Summary of Contents for CRB 40-A Series
Page 7: ...2 Applicable auto swiches...
