![background image](http://html1.mh-extra.com/html/smc-networks/crb-40-a-series/crb-40-a-series_operation-manual_1299527015.webp)
10
No.
Auto Switch Adjustment
Rotation range of the output shaft with single flat (key for size 40 only) and auto switch mounting position.
Solid-lined curves indicate the rotation range of the output shaft with single flat (key). When the single
flat (key) is pointing to the END
①
direction, the switch for rotation END
①
will operate, and when the
single flat (key) is pointing to the END
②
direction, the switch for rotation END
②
will operate.
Broken-lined curves indicate the rotation range of the built-in magnet. Operating angle of the switch can
be decreased by either moving the switch for rotation END
①
clockwise or moving the switch for rotation
END
②
counterclockwise. Auto switch in the figures on the left is at the most sensitive position.
Each auto switch unit comes with one right-hand and one left-hand switches.
Summary of Contents for CRB 40-A Series
Page 7: ...2 Applicable auto swiches...