![background image](http://html1.mh-extra.com/html/smc-networks/crb-40-a-series/crb-40-a-series_operation-manual_1299527024.webp)
19
No.
Size: 20, 30
Assembly procedure
For D-S/T79
□
, S7P, R73/80
□
1.
Assemble by following the assembly procedure on page 15.
2.
Mount the joint (12) to the stopper lever (4) and fasten it using the hexagon socket set screw (13).
3.
Mount the magnet lever (18) to the joint (12) and fasten it using the hexagon socket set screw (24).
4.
Mount the stopper ring (3) to the cover (A) (14) and fasten it using the cross recessed round head screw (20)
(tightening torque is approx. 0.8 Nm).
5.
Insert the holding blocks (17) in the grooves of the cover (A) (14), place the cover (B) (15) on top and fasten them
with the cross recessed round head screw (22).
6.
Assemble by following the assembly procedure on page 13
.
For D-M9
□
1.
Assemble by following steps 1 to 5 of the above procedure.
2.
Carefully fix the switch holder (25) to the holding block (17) using the cross recessed round head screw (26).
3.
Insert the D-M9 auto switch into the switch holder (27) and carefully fasten it using the slotted set screw attached
to the switch (tightening torque is 0.05 to 0.1 Nm).
4.
Move the switch holder (25) to the setting position and fasten it using the cross recessed round head screw (26).
When disassembling the product, disassemble it following the procedure in the reverse order.
When the screw tightening torque is not specified, the tightening torque shall be approx. 0.49 Nm.
○
25
○
26
○
20
26
Cross recessed round head screw
2
25 Switch holder
2
24 Hexagon socket set screw
1
23
Cross recessed round head screw
2
22
Cross recessed round head screw
1
21
Cross recessed round head screw
2
20
Cross recessed round head screw
3
19 Magnet
2
18 Magnet lever
1 Including No.1
17 Holding block
1
16 Switch block
1
15 Cover (B)
1
14 Cover (A)
1
13 Hexagon socket set screw
1
12 Joint
1
11 Hexagon socket head cap screw 2
10 Hexagon socket head cap screw 2
9 Hexagon socket head cap screw 2
8 Block retainer
2
7 Stopper block
2
6 Rubber bumper
1
5 Lever retainer
1
4 Stopper lever
1
3 Stopper ring
1
2 Auto switch
2
1 Rotary actuator
1 Product
No.
Description
Qty
NOte
Fig. 1
Gap
No gap
Fig. 2
Summary of Contents for CRB 40-A Series
Page 7: ...2 Applicable auto swiches...