![background image](http://html1.mh-extra.com/html/smc-networks/crb-40-a-series/crb-40-a-series_operation-manual_1299527021.webp)
16
No.
4.2 With angle adjustment unit
Assembly procedure
1. Mount the rubber bumper (9) onto the stopper lever (6).
2. Insert the stopper lever (6) onto the shaft of the body (1) and fasten it to the lever retainer (7) using the hexagon
socket head cap screws (8).
(Refer to Fig. 1 and Fig. 2 for mounting precautions.)
3. Mount the stopper blocks (3) onto the stopper ring (2) and carefully fasten the block retainer (7) using the
hexagon socket head cap screws (5).
4. Fasten the stopper ring (2) to the body (1) using the hexagon socket head cap screws (10).
5. Place the cap (11) on the stopper ring (2).
The tightening torque for each size is shown in the table below.
Size
Tightening torque [Nm]
10
1.0 to 1.2
15
20
2.5 to 2.9
30
3.4 to 3.9
40
When disassembling the product, disassemble it following the procedure in the reverse order.
11 Cap
1
10 Hexagon socket head cap screw 3 2pcs. for size 10
9 Rubber bumper
1
8 Hexagon socket head cap screw 2
7 Lever retainer
1
6 Stopper lever
1
5 Hexagon socket head cap screw 2 4pcs. for size 40
4 Block retainer
2
3 Stopper block
2
2 Stopper ring
1
1 Rotary actuator
1 Product
No.
Description
Qty
Note
Fig. 1
Gap
Fig. 2
No gap
Summary of Contents for CRB 40-A Series
Page 7: ...2 Applicable auto swiches...