![background image](http://html1.mh-extra.com/html/smc-networks/barricade-plus-smc7004fw/barricade-plus-smc7004fw_user-manual_1300260048.webp)
C
ONFIGURING
THE
B
ARRICADE
P
LUS
4-19
LAN Gateway and DHCP Settings
Configure the gateway address of the Barricade Plus. To
dynamically assign the IP address for client PCs, enable the DHCP
Server, set the lease time, and then specify the address range. Also
remember to configure all of your client PCs for dynamic address
allocation.
Valid IP addresses consist of four numbers, and are separated by
periods. The first three fields are the network portion, and can be
from 0–255, while the last field is the host portion and can be from
1–254. However, remember not to include the gateway address of
the Barricade Plus in the client address pool. If you change the
pool range, make sure the first three octets match the gateway’s IP
address, i.e., 192.168.2.xxx.
Note:
Verify that your IP address pool is from 192.168.2.2 to
192.168.2.255, your Subnet Mask is 255.255.255.0 and your
Default Gateway is 192.168.2.1.
Summary of Contents for Barricade Plus SMC7004FW
