![background image](http://html1.mh-extra.com/html/smc-networks/barricade-plus-smc7004fw/barricade-plus-smc7004fw_user-manual_1300260021.webp)
I
NSTALLATION
2-4
System Requirements
You must have an ISP that meets the following minimum
requirements:
•
Internet access from your Internet Service Provider (ISP) using an
xDSL modem, or cable modem.
•
A PC using a fixed IP address or dynamic IP address assignment
via DHCP, as well as a gateway server address and DNS server
address from your service provider.
•
A computer equipped with a 10 Mbps, 100 Mbps, or 10/100
Mbps Fast Ethernet card, or a USB-to-Ethernet converter.
Item
Description
Reset
Button
Use this button to reset the power and restore the default
factory settings.
LEDs
Power, WAN and LAN port status indicators.
(See Verify Port Status on page 2-9.)
LAN
Ports
Fast Ethernet ports (RJ-45). Connect devices on your local
area network to these ports (such as a PC, hub or switch).
WAN
Port
WAN port (RJ-45). Connect your cable modem, xDSL
modem, or an Ethernet router to this port.
Power
Inlet
Connect the included power adapter to this inlet.
Warning
: Using the wrong type of power adapter may
cause damage.
Summary of Contents for Barricade Plus SMC7004FW
