manualshive.com logo in svg

SMC Networks Barricade Plus SMC7004FW, User Manual, Page: 22 / 134

Share
Download
SMC Networks Barricade Plus SMC7004FW User Manual Download Page 22

I

NSTALLATION

2-5

•

TCP/IP network protocol installed on each PC that needs to 
access the Internet.

•

A Java-enabled Web browser, such as Microsoft Internet 
Explorer 5.0 or above or Netscape Communicator 4.0 or above 
installed on one PC at your site for configuring the Barricade 
Plus.

Connect the System

The Barricade Plus can be positioned at any convenient location in 
your office or home. No special wiring or cooling requirements are 
needed. You should, however comply with the following 
guidelines:

•

Keep the Barricade Plus away from any heating devices.

•

Do not place the Barricade Plus in a dusty or wet environment.

You should also remember to turn off the power, remove the power 
cord from the outlet, and keep your hands dry when you install the 
Barricade Plus.

Basic Installation Procedure

1.

Connect the LAN

: You can connect the Barricade Plus to your 

PC, or to a hub or switch. Run Ethernet cable from one of the 
LAN ports on the front of the Barricade Plus to your computer’s 
network adapter or to another network device. 

2.

Connect the WAN

: Prepare an Ethernet cable for connecting the 

Barricade Plus to a cable/xDSL modem or Ethernet router.

Summary of Contents for Barricade Plus SMC7004FW







































































































































Reviews:

No comments