SMC Networks Barricade Plus SMC7004FW, User Manual, Page: 36 / 134

Share

Page: 36 / 134

SMC Networks Barricade Plus SMC7004FW User Manual Download Page 36

C

ONFIGURING

THE

B

ARRICADE

P

LUS

4-7

Advanced Setup Menu

Selecting the “Advanced Setup” displays the main menu on the left-hand
side of the screen and descriptive information on the right-hand side. The
Main Menu links are used to navigate to other menus that display
configuration parameters and statistics.

Navigating the Web Browser Interface

The Barricade Plus’ advanced management interface includes nine key
menus – System, WAN, LAN, NAT, Firewall, VPN, SNMP, Tools, and
Status. The System menu provides general information on the current
settings and how to configure the Barricade Plus. The WAN, LAN, NAT,
Firewall, VPN, and SNMP menus are used to configure the LAN and
WAN interface, as well as other functions. While the Tools menu is used to
backup the Barricade Plus, restore the factory settings, update the
firmware, or reset the Barricade Plus. The Status menu is used to see the
connection status for the Barricade Plus’ WAN/LAN interfaces, firmware,
and hardware version numbers, any illegal attempts to access your network,

«
...
34
35
36
37
38
...
»

Summary of Contents for Barricade Plus SMC7004FW







































































































































Reviews:

No comments