P
ORT
C
ONFIGURATION
2-27
-
Sym
- Transmits and receives pause frames for flow control (Gigabit
Ethernet ports only)
-
FC
- Supports flow control
•
Trunk
– Indicates if a port is a member of a trunk. To create trunks
and select port members, see “Port Trunk Configuration” on page
2-66.
Note:
Autonegotiation must be disabled before you can configure or
force the interface to use the Speed/Duplex Mode or Flow
Control options.
Web
– Click Port/Port Configuration or Trunk Configuration. Modify the
required interface settings, and click “Apply.”
CLI
– Select the interface, and then enter the required settings.
Console(config)#interface ethernet 1/13
3-68
Console(config-if)#description RD SW#13
3-68
Console(config-if)#shutdown
3-73
.
Console(config-if)#no shutdown
Console(config-if)#no negotiation
3-70
Console(config-if)#speed-duplex 100half
3-69
Console(config-if)#flowcontrol
3-72
.
Console(config-if)#negotiation
Console(config-if)#capabilities 100half
3-71
Console(config-if)#capabilities 100full
Console(config-if)#capabilities flowcontrol
Summary of Contents for 6750L2
